23
INSTALLATION
INSTRUCTIONS
SLIM TRIM
INSTALLATION
3.9.1
The
600 Slim Trim
is supplied with the appliance. Remove this trim and place
somewhere that damage cannot occur whilst preparing the installaon.
The appliance is already prepared for installaon of this trim, with the excepon of
the two vercal side wings. These wings allow the
600 Slim Trim
to be screwed to
the appliance to hold it securely in the required posion. To fit these vercal side
wings 6 knockouts must first be removed to allow for screw fixings, 3 on each side.
The diagrams below show these knockout posions. The side knockouts allow the
fixing of the two side wings.
Fit the two side wings as shown below. Note the fine slits at the top and boLom of
the side plates, these slits allow the
600 Slim Trim
to be fixed in mulple posions
depending on the thickness of the wall lining, allowing the trim to be held ghtly
against the wall surface.
The appliance is now ready to accept the
600 Slim
Trim
once the appliance has been installed.
Removal of the 600 Slim trim requires the removal
of the inner 4 screws. Then simply ease the trim
forwards as it disengages from the upper support
brackets.
