Technical Documentation
KSR-V – Capacitor-Bank Protection Relay
Rev. 05
10
5 User Interface
The KSR-V uses a graphical LC display with automatic backlight for showing the measurement values and
the device settings.
The device provides 4 keys to the user to accept any inputs. The action, a key performs, depends on the
actual context and is given by small icons in the bottom line of the display. This means a much more easy
and intuitive usage of the device, even in complicated situations and settings.
5.1 Main menu
The main menu is the central point of menu navigation. Here you can directly enter all submenus or the
measurement display.
The main menu shows the following menu items for configuration or measurement display:
measurement
= display measured values
auto-roll =
display measured values with automatic value rotation
harmonics
- This submenu shows the single harmonics for all input channels
setup
- The device settings can be found inside this submenu
device info
-
This submenu shows some information about the device
reset min/max =
reset minimum/maximum values
KEYS:
The user can navigate through the menu entries by use of the "
" and "
" keys. On the left side of the
topmost item, a tiny arrow ( ">" ) shows which item is actually selected. By pressing "
", one can enter into
the selected submenu. The left key is not used in the main menu.
After connecting the supply voltage the device automatically starts with the submenu
"measurement"!
Whenever a capital "M" is used as key symbol in any sub-menu, pressing the key will
switch straight to the main menu.
!
