26
27
8.6.1 Connecting DAI
1. Align the tip of the DAI click-on adaptor with the groove just above the battery door and below the
model number.
2. Once in place, move the DAI click-on adaptor in the direction of the battery door.
3. Gently click the DAI click-on adaptor onto the hearing aid.
8.6.2 Disconnecting DAI
1. Press and hold the button on the front side of the DAI click-on adaptor.
2. Gently remove the DAI click-on adaptor from the hearing aid.
8.7 Flight mode (optional)
i
WARNING: When boarding a flight or entering an area where RF transmitters are prohibited, wireless
functionality must be deactivated.
Your Beltone Trust hearing aids allow you to control them from your smart phone or Beltone Direct Remote
Control. However, in some areas you are requested to turn off wireless communication.
Follow these steps to turn off wireless mode:
1. For each hearing aid, open and close (open-close, open-close, open-close) the battery door three
times within a 10-second period.
2. Double-dings for ten seconds (
etc.) indicate that your hearing aid is in Flight mode.
Follow these steps to activate wireless mode:
1. For each hearing aid, open and close the battery door once.
2. Your hearing aids are in wireless mode after 10 seconds.
i
NOTE: Both hearing aids must be set in Flight mode - even with synchronisation enabled.
NOTE: It is important to wait an additional 15 seconds after wireless function resumes before opening
and closing the battery door again for any reason. Flight mode will resume if you open and close the
battery door during this 15-second window.
