background image

6

7

4 Statement

This device complies with part 15 of the FCC rules and ICES-003 of the IC rules.

Operation is subject to the following two conditions: 

1.  This device may not cause harmful interference.
2.  This device must accept any interference received, including interference that may cause undesired 

operation.

i

 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC rules and ICES-003 of the IC rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from the one in which the receiver is con-

nected.

•  Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications can void the user´s authority to operate the equipment.

The products comply with the following regulatory requirements:

•  In EU: the device conforms to the Essential Requirements according to Annex I of Council Directive 

93/42/EEC for medical devices (MDD) and essential requirements and other relevant provisions of 
Directive 1999/5/EC (R&TTE).

•  The declaration of conformity may be consulted at www.beltone.com
•  In US: FCC CFR 47 Part 15, subpart C.
•  Other identified applicable international regulatory requirements in countries outside the EU and US. 

Please refer to local country requirements for these areas.

•  In Canada: these hearing aids are certified under the rules of IC.
•  Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is 

granted pursuant to the Japanese Radio Law (

電波法

) and the Japanese telecommunications Busi-

ness Law (

電気通信事業法

) This device should not be modified (otherwise the granted designation 

number will become invalid)

Patents: US 7,593,537 US 8,00,849

Mini Receiver In-the-Ear (RIE) hearing aids of type VE312 with FCC ID:X26VE312, IC number 6941C-VE312 
and size 312 battery are available in the following variants:

TST1763-DRW, TST963-DRW, TST663-DRW

Receiver-in-the-ear (RIE) hearing aids of type BRIE with FCC ID X26BRIE, IC number 6941-BRIE and size 
13 battery are available in the following variants:

TST1764-DRW, TST964-DRW, TST664-DRW

Summary of Contents for TST1763-DRW


































Reviews: