22
23
order to place Auto-Phone magnet properly:
1. Clean the telephone receiver thoroughly.
2. Hold the telephone vertically, in a position similar to when making
a telephone call.
3. Place the magnets just below the telephone receiver. Make sure
not to cover the microphone openings. If necessary, move the
magnet to another position to improve ease of use and comfort
while speaking.
i
NOTE: If you are not satisfied with the strength of Auto-Phone, you can reposition the Auto-Phone magnet
or add additional magnets.
NOTE: Prior to placing the magnet on the telephone or cell phone, use a recommended cleaning agent to
clean the telephone.
8.4.2 Auto-Phone usage
1. Use your telephone in a normal manner.
2. A short melody indicates that the Auto-Phone feature has automatically switched on the telephone
programme.
i
NOTE: Initially, you may need to move the telephone receiver slightly to find the best position for reli-
able Auto-Phone activation and good hearing on the telephone.
8.5 Telecoil (64-DRW only)
Your hearing aids may be equipped with a telecoil. The Telecoil programme may
help to improve speech understanding with Hearing Aid Compatible telephones
and in theatres, cinemas, houses of worship etc. that have a tele-loop installed.
The telecoil cannot work without a teleloop (a.k.a. induction loop) or a Hearing Aid
Compatible (HAC) telephone. When you switch on the Telecoil programme, your
hearing aids pick up signals from the teleloop or HAC telephone.
i
NOTE: If you are having trouble hearing with the teleloop, ask you hearing care professional to adjust the
programme.
NOTE: If there is no sound from the hearing aids in a tele-loop system and an active Telecoil programme,
the teleloop system may not be turned on or is not operating correctly.
NOTE: Your hearing care professional will gladly provide information regarding a tele-loop system at your
home.
8.5.1 Teleloop systems
To use teleloop systems, follow these steps:
1. Switch your hearing aids to the Telecoil programme.
2. Find a good spot. Reception is not clear in all locations; it depends on the induction loop. Look for
signs or find another spot to sit.
3. If needed, adjust the volume.
4. When you leave, switch to a microphone programme.
