Belmont Bel-Cypher N, Installation Manual

Page: 15 / 57

Bel-Cypher N
7. Installation Procedure
1. Remove packing material cover for Pillar, then remove pillows shown in below
drawing they are used for pillars at installation.
1. 1.
（
Two pillows
）
Put vinyl in the packing or waste clothe on the pillow for protecting scratch of
Pillar. Then, put the Pillar on the pillows(Sliding Unit ASSY is down side).
2
． ． ． ．
Remove pillar cover from Pillar Assy
Take out pillows and put them
on the floor as shown below
Pillar without upper cover is shown
Put waste cloth on packing vinyl
on the pillows to avoid scratch
Pillow
Pillow
(1): Bind M3 × 6 2 sets
(2): Nylon washer
φ
3 2 sets
Pillar cover
Pillar assy