Belmont Bel-Cypher N, Installation Manual

Page: 55 / 57

Bel-Cypher N
7)
Beams in T.M.J.
7-1) Are all positioning beams turned on
by depressing forward / back-
ward switch of Focus Beam?
□
OK
□
NG
7-2) Dose Forward / backward operation of Focus Beam on ARM work
by depressing forward / backward switch?
□
OK
□
NG
8)
Are all positioning beams turned off automatically when forward / back-
ward switch of Focus Beam are not depressed for 1 minute?
□
OK
□
NG
9) Check in Panorama mode
9-1) Does equipment work normally with exposure op-
eration at 0kV, 0mA, at Panoramic mode?
Allophone □
OK
□
NG
Vibration □
OK
□
NG
10) Check in T.M.J.
10-1) Does equipment work normally with exposure op-
eration at 0kV, 0mA, at TMJ mode?
Allophone
□
OK
□
NG
Vibration □
OK
□
NG
10-2) After the first exposure, Does Rotation Arm Unit return to start
position automatically.
□
OK
□
NG
10-3) After the second exposure, Does Rotation Arm Unit stop at the
end position.
□
OK
□
NG
11) Does the buzzer sound to facilitate "Turning the Power Switch OFF"
in 5 minutes later after the last operation?
□
OK
□
NG
12) After power is turned off automatically, Will power turn on again
normally?
□
OK
□
NG
5. Externals
1) Are there scratches or cracks? □
OK
□
NG
2) Are all covers secured with screws? □
OK
□
NG