Belmont Bel-Cypher N, Installation Manual

Page: 39 / 57

Bel-Cypher N
4) When installation is finished, below screen is shown, click
「
Finish
」
5.Installation of Bel-Cypher N Twain Driver
1) Turn the power of PC ON.
※
If the driver is not installed automatically, then run
「
Setup.bat
」
stored in a CD
2) Set Bel-Cypher N TWAIN Driver of Install Disc.
3) .NET Framework 3.5 SP1 setup display such as Fig 2-1 starts automatically.
Click “Accept”
Fig2-1 .NET Framework 3.5 SP1 Setup screen
※
※ ※
※
In case of .NET Framework 3.5 SP1 is already installed
、
、 、
、
Fig2-1 is not displayed.
※ ※ ※ ※
.NET Framework 3.5 SP1 is included as a standard component in Windows, thus Fig.2-1 will
not be shown.