Belmont Bel-Cypher N, Installation Manual

Page: 35 / 57

Bel-Cypher N
Right click LAN Connection that is connected to Bel-Cypher N. Choose property. If you use the LAN
card supplied with Bel-Cypher, open
「
Intel(R) Gigabit CT Desktop Adapter
」
5) Double click
「
Internet Protocol Version 4(TCP/IPv4)
」
in
「
The connection uses the fol-
lowing items:
」
6) Choose
「
Use the following IP address
」
7) Set IP address and subnet mask as follows
※ ※ ※ ※ You need to set following values first, You need to set following values first, You need to set following values first, You need to set following values first, even though you change IP address later even though you change IP address later even though you change IP address later even though you change IP address later
IP address
：
169.254.87.101
Subnet mask:
：
255.255.0.0
8) Enter only IP address and Subnet Mask. Click OK to close all windows