Bellini BTPRC250, Manual

Page: 15 / 28

15
Cake
• Follow the steps in “preparations before
cooking”.
• Turn the pressure regulator to “CLOSE” position.
• Insert the connector of power cord to the
socket of the pressure cooker and put the plug
into to the wall power outlet. Switch Power
outlet on, the appliance is now in Standby
Mode.
• Press CAKE button, the Cake cooking indicator
will illuminated. The default pressure keeping
time “0030” appears on LED Display and start to
flash, “30” indicators the pressure keeping time
is 30 minutes.
• Within 8 seconds after pressing the Cake
button,s
- You can press + or - buttons to set a different
pressure keeping time if you prefer an
alternative cooking time (The adjustment time
range is 30-50 minutes).
Note: If no button is pressed within 8 seconds,
the appliance activates the selected mode
automatically.
• The cooking process will start automatically
after 8 seconds flashing time has elapsed.
• During cooking, the appliance will beep 1 time
when the working pressure is reached and the
pressure keeping time will start counting down.
• When the pressure keeping time has elapsed,
the electric pressure cooker will beep 5 times
and automatically switch to keep warm mode.
The Cake cooking indicator goes out and the
Warm/Cancel indicator lights up yellow.
• After the cooking is finished, you can press the
Warm/Cancel button to turn off the keep warm
function and unplug the appliance immediately
after use.
Note: The Warm/Cancel button can be pressed
at any time during cooking to cancel the
operation.
• Before opening the lid, make sure to release the
pressure from the inside of the appliance (refer
to “Releasing pressure after cooking” section).
Reheat
This cooking mode is used when just wanting to
warm up leftovers ( e.g . cold cooked rice etc. )
• Follow the steps in “preparations before
cooking”.
• Turn the pressure regulator to “CLOSE” position.
• Insert the connector of power cord to the socket
of the pressure cooker and put the plug into to
the wall power outlet. Switch Power outlet on,
the appliance is now in Standby Mode.
• Press REHEAT button, the Reheat cooking
indicator will illuminated. The default pressure
keeping time “0010” appears on LED Display and
start to flash, “10” indicators the pressure keeping
time is 10 minutes.
• Within 8 seconds after pressing the Reheat
button,
- You can press + or - buttons to set a different
pressure keeping time if you prefer an alternative
cooking time (The adjustment time range is 5-15
minutes).
- You can also press Timer and + or – buttons to set
the delayed cooking time. (refer to “Setting the
timer” section)
Note: If no button is pressed within 8 seconds,
the appliance activates the selected mode
automatically.
• The cooking process will start automatically
after 8 seconds flashing time or preset timer has
elapsed.
• During cooking, the appliance will beep 1 time
when the working pressure is reached and the
pressure keeping time will start counting down.
• When the pressure keeping time has elapsed,
the electric pressure cooker will beep 5 times
and automatically switch to keep warm mode.
The Reheat cooking indicator goes out and the
Warm/Cancel indicator lights up yellow.
• After the cooking is finished, you can press the
Warm/Cancel button to turn off the keep warm
function and unplug the appliance immediately
after use.
Note: The Warm/Cancel button can be pressed
at any time during cooking to cancel the
operation.
• Before opening the lid, make sure to release the
pressure from the inside of the appliance (refer
to “Releasing pressure after cooking” section).