8
Bellfires
English
Instructions for use and installation instructions
Follow the instructions issued by your local fire brigade.
The fire can be taken in operation if national and local regulations are satisfied. The
required constructive adaptations should be satisfied as well.
Installation instructions
Wood and wood briquettes may be stoked in the fire.
Coals can’t be burned in the fire, because of the absence of a grid/ridling grill.
Never use the appliance to burn rubbish.
Please read all instructions/stickers on and around the appliance.
Please also study the directions for use before using the appliance for the first time.
When you first fire up your appliance, there are a number of extra points you should
take into account. See chapter 6.
In transit, some parts of the appliance may have moved from their original place.
The Slide Bell is a built-in fire with lift door. Check that the door opens and closes,
the retardant plates (brake plates) are fitted correctly to the brackets at the top of the
fire, the interior panels are fixed to the walls and the stones on the bottom have not
moved.
Avoid over-loading (white burning glow), caused, for example, by lengthy burning
with a fully open primary air vent, or by burning too much wood in one go.
The fire can then become over-heated.
The appliance may only be set up if the appliance and location meets the
- national and local installation regulations;
- local fire brigade regulations and required architectural provisions.
www.tapis.pl