3
1.
BEA SMP_QX_E
PM1/NAV:
navigates within the various menus (Utility, Edit)
PM1:
sets any selected parameter value
sets LEVEL of channel A, when function Level Pot in System Utility is active
PM2:
sets selected parameter values
sets LEVEL of channel B, when function Level Pot in System Utility is active
Enter button:
confirms any edited parameter
jumps to next higher sub menu
ESC button:
quits any parameter
jumps to next lower sub menu
Utility button
:
interrupts any edit process
opens the Utility menu
Edit button
:
interrupts the UTILITY function. Activates EDIT CH. A (pushed once only)
Pushed again, Edit button activates EDIT CH.B
Pushed again, Edit button activates EDIT CH.A
AMP Status LED:
Blue off: Stereo Mode (=normal) // Blue on: Bridge Mode
Yellow on: DSC active
Red on: Protect Mode
Output LED meter
Displays Amp Output Level in reference to maximum Output
5 green LEDs, -20...0dB
Limit LED
:
Yellow LED shows, that RMS Limiter or Clip Limiter is active.
CLIP LED
:
Red LED shows, Clipping detected at input (post ADC) or at Output
In PC software, Input- / and Output Clipping are shown separately
In case of Input-Clipping, Level of input signal must be reduced (Risk of digital distortion)
Output-Clipping may be caused by excessive internal signal processing, such as extreme
EQ settings. Avoid / correct such settings.
Operational features - Front -
Operational features - Front -
!
