20
1.
BEA SMP_QX_E
Out:A Low-A Polarity
Polarity = Normal
Out:A Low-A Polarity
Polarity = Normal
PM1
The default setting of polarity is normal (in phase)
In the given example, polarity was changed to INVERT (out of Phase).
Enter
ESC (quit)
Out:A Low-A HPF
20.0 Hz No Cut-Off
Out:A Low-A HPF
20.0 Hz No Cut-Off
PM1
ESC
Default setting of HPF (High Pass Filter) is: cut off frequency: 20.0Hz
Slope: no cut-off (not active).
In the given example, HPF Cut off frequency is changed to 50.0Hz, and HPF Slope is changed
to butterworth 6dB.
Enter
ESC (quit)
Out:A Low-A HPF
a
20.0 Hz No Cut-Off
Out:A Low-A HPF
a
20.0 Hz No Cut-Off
Out:A Low-A HPF
a
50.0 Hz Butwrth 6dB
Out:A Low-A HPF
a
50.0 Hz Butwrth 6dB
PM2
The default setting of DSC (DYNAMIC SIGNAL CONTROL) is Off (not active)
In the given example, DSC was changed to ‚On‘ (active), using PM1.
DSC Processor: will boost the overall dynamics of sound
DSC means extended dynamics, fundametal dry subs and transparent, crystal clear treble.
Out:A Low-A Polarity
a
Polarity = Normal
Out:A Low-A Polarity
a
Polarity = Normal
Out:A Low-A Polarity
a
Polarity = Invert
Out:A Low-A Polarity
a
Polarity = Invert
Out:A Low-A DSC
DSC = Off
Out:A Low-A DSC
DSC = Off
Enter
ESC (quit)
Out:A Low-A DSC
a
DSC = Off
Out:A Low-A DSC
a
DSC = Off
Polarity
Polarity
DSC
DSC
HPF
HPF
LPF
LPF
Out:A Low-A LPF
16.0 kHz No Cut-Off
Out:A Low-A LPF
16.0 kHz No Cut-Off
Default setting for LPF (Low Pass Filter) is: Cut off frequency: 16.0kHz
Slope: No Cut-Off (not active).
In the given example, LPF Cut off frequency is changed to 10.0kHz , and HPF Slope is
changed to Butterworth 6dB.
Low Pass filter cutoff frequency Range: 20Hz-16KHz.
LPF slopes:
Butterworth (1st, 2nd, 3rd, 4th oder)
Linkwitz Riley (2nd and 4th. order)
Bessel (2nd and 4th. order)
Enter
ESC (quit)
Out:A Low-A LPF
a
16.0 kHz No Cut-Off
Out:A Low-A LPF
a
16.0 kHz No Cut-Off
