25
1.
BEA SMP_QX_E
In this window, you may select the ID numbers for up to 10 devices which
you intend to control.
If any change of ID number is required, use the button ‚Configure ID Device‘
All devices which are connected within the system are filed in the Select ID list.
In order to change its ID
number, you may select any device from the Select ID list.
The new ID number must be chosen from the Select New ID Box.
Write ID button
will overwrite the old device ID with the new one.
OK Button
will start the main program
The ID list will show all devices connected to the system
The ID list will show ID number and device name
The background color of the individual devices is green - with black script - as long as the main
window of the devices are closed.
As soon as the Main window of any device is opened by double click on the ID
position, the ID number and the device name will show in red color.
Pushing the STOP button (in main command menu) will set the device
‚offline‘. In the ID List it show in red background color.
When the main window is closed by the (X) button (right upper corner), the
device is still online. In the ID List that device will show with green background
and black script.
In case of any interrupted communication between PC and devices
(PC failure) or Device main Window has been closed (ID list shows black script
on green background), the Device(s) may still be set to offline
(after approx. 20sec.) by the following procedure:
