7
1.
BEA SMP_QX_E
SYSTEM UTIlity
-- Channel Link --
SYSTEM UTIlity
-- Channel Link --
Channel Link
Link : OFF
Channel Link
Link : OFF
PM1
Enter
Enter
ESC (quit)
Default setting of Channel Link ist OFF.
This parameter will be stored with command ‚Save Program to PC und Save Program to Device‘
In the given example, Channel Link was changed to ‚ON‘, using the PM1 encoder.
Alternative settings of Channel Link: ON / OFF
Channel-Link function may only be used, when System Setup is set to ‚STEREO‘
When Channel Link is changed from OFF to ON, all Channel A parameters will be copied to Channel B.
(This includes the Status Locked / Unlocked Preset)
Parameters ‚Name‘ and ‚Input Source‘ Routing will not be copied.
When Input Edit Button is pushed in Channel Link Mode, Display will show, that Channels A and B
are linked. Any change of parameter for channel A will also be true for channel B.
In Channel Link Mode, display will read: IN : A + B instead of In : A and In : B
EQ-1 will be shown als EQ-1(s).
Channel Link
Link : ON *
Channel Link
Link : ON *
Channel Link
Wait: channel linking...
Channel Link
Wait: channel linking...
Channel Link
Wait: channel unlinking...
Channel Link
Wait: channel unlinking...
SYSTEM UTILITY:
-- Delay Units --
SYSTEM UTILITY:
-- Delay Units --
Delay Units
Unit : Distance (m)
Delay Units
Unit : Distance (m)
PM1
Enter
Enter
ESC (quit)
Delay Units
Unit : Time (ms) *
Delay Units
Unit : Time (ms) *
Default setting for Delay Units is Distance (m).
This parameter will not be stored with command ‚Save Program to PC und Save Program to Device‘
In the given example, Delay Units are changed to Time (ms), using the PM1 encoder.
Possible settings of Delay Units: Distance (m) or Time (ms)
Channel Link
Channel Link
Delay Units
Delay Units
