1
1.
BEA SMP_QX_E
BELL SMP_QX Power Amplifier
with Digital Audio Management
SAFETY INSTRUCTIONS
In order to avoid damage to hardware or electronic components, during unit use and/or maintenance, It is
necessary to follow the safety instructions.
Prior to installing the unit, please read this manual carefully. Follow all instructions and keep it for further
reference.
Manipulating or opening the unit may cause damage to people. -Place the unit in a location protected
from weather and in a good distance from water and moisture. -Don‘t expose the unit to sources of heat,
such as radiators, spotslamps, hot power amplifiers etc.. -Avoid any kind of liquid entering inside the unit.
-Connect the unit to a power supply line able to support the units power consumption. The power supply line
must be in good operating conditions. The power supply line must have an efficient ground line. -Disconnect
the unit from a.c. power socket during thunderstorm (lightning) or when out of use for long periods of time.
Leave any servicing to qualified service personnel only. Servicing is required when the apparatus has been
damaged in any way, such as: -Defective connectors -Liquid has spilled inside the unit. -The unit has been
dropped or has been mechanically or electrically damaged or if the personal password of the user has been
forgotten.
No user-serviceable parts inside. For service, refer to an authorized maintenance centre.
BELL SMP_QX power amplifiers comply with EMC Directive 89/336/CEE (Directive on approximation
of member nation‘s ordinance concerning the electromagnetic compatibility) and following modifications
92/31/CEE and 93/68/CEE, as stated in EN 500821:1997, EN 55013:1990, EN 55020:1994 standards. These
units comply to Low Voltage Directive 73/23/EEC (Directive on approximation of member nation‘s ordi
-
nance concerning electric equipment designed to be used within the specified voltage range), and following
modifications 93/68/CEE, as stated in EN 60065:1998 standard. To avoid electric shock don‘t open this unit.
To prevent risks of fire and/or electric shock, don‘t expose this unit to rain or moisture.
PACKAGING
This unit package has been submitted to ISTA 1A integrity tests. We suggest you check the unit immediately
after unpacking it. If any damage is found, immediately inform the dealer. Keep all unit packaging parts to
allow inspection. Our company is not liable for any damage that occurs during shipment.
SHIPMENT / TRANSPORT LOSS OR DAMAGE
Products are sold and shipped ex warehouse and the shipment is at charge and risk of the buyer. Possible
damages to the unit should be immediately notified to the forwarder.
