F5D8636-4_man updated by ARC
Page 64 of 121
[encryption chart.tif][use current image]Use the same image
Note to Mac users: Original Apple AirPort products support 64-bit encryption
only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please
check your product to see which version you are using. If you cannot configure
your network with 128-bit encryption, try 64-bit encryption.
Setting MAC Address Control
The MAC address filter is a powerful security feature that allows you to specify
which computers are allowed on the wireless network. Note: This list applies only
to wireless computers. This list can be configured so any computer attempting to
access the wireless network that is not specified in the filter list will be denied
access. When you enable this feature, you must enter the MAC address of each
client (computer) to which you want to allow network access. The “Block” feature
lets you turn on and off access to the network easily for any computer without
having to add and remove the computer’s MAC address from the list.
[FW20.tif]
Setting up an Allow Access List
1. Select the “Allow” radio button (1) to begin setting up a list of computers
allowed to connect to the wireless network.
(1)
(3)
(4)
(5)
(2)
