F5D8636-4_man updated by ARC
Page 16 of 121
I. Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal operation
while maintaining the programmed settings. You can also restore the
factory default settings by using the “Reset” button. Use the restore option
in instances where you may have forgotten your custom password.
i. Resetting the Router
Push and release the “Reset” button. The lights on the Router
will momentarily flash. The “Router” light will begin to blink.
When the “Router” light becomes solid again, the reset is
complete.
ii. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The lights on the Router will momentarily flash.
The “Router” light will begin to blink. When the “Router” light
becomes solid again, the restore is complete.
J. Power Jack – Black
Connect the included 15V/.08A DC power supply to this jack.
K. WPS Push Button (insert the security lock icon) – White
This button is for
the
Wi-Fi Protected Setup™ feature. Refer to the
“Changing the Wireless Security Settings” section for more details.
-----------------------------------------------------------------------------------------
Connecting and Configuring your Modem Router
Verify the contents of your box. You should have the following:
•
Belkin N Wireless Modem Router
•
RJ11 Telephone Cord
•
RJ45 Ethernet Networking Cable
•
Power Supply
•
Belkin Personal Network Assistant CD
•
User Manual on CD
•
Micro Filter (if your ISP line requires)
