42
Alternate Setup Method
43
42
Setting your Connection Type if you are a Telstra
®
BigPond User
[Australia Only] . Your user name and password are provided to you by
Telstra BigPond . Enter this information below . Choosing your state
from the drop-down menu
(1)
will automatically fill in your login server
IP address . If your login server address is different than one provided
here, you may manually enter the login server IP address by placing a
check in the box next to “User decide login server manually”
(4)
and
type in the address next to “Login Server”
(5)
. When you have entered
all of your information, click “Apply Changes”
(6)
. After you apply the
changes, the Internet Status indicator will read “connection OK” if
your N1 Vision is set up properly .
(1)
(2)
(4)
(5)
(3)
(6)
1. Select your State
Select your state from the drop-down menu
(1)
. The “Login
Server” box will automatically be filled in with an IP address .
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address . See “User decide login server manually”
(4)
.
2. User Name
Type in the user name that has been provided by your ISP here .
3. Password
Type in your password and retype it into the “Retype Password”
box to confirm it .
Summary of Contents for F5D8232-4
Page 1: ...User Manual...
Page 2: ......
Page 4: ......
