Belkin F5D8232-4, User Manual

Page: 104 / 114

100
Troubleshooting
101 100
Do Belkin products support WPA?
Note:
To use WPA security, all your clients must be upgraded
to drivers and software that support it . At the time of this FAQ
publication, a security patch download is available, for free,
from Microsoft . This patch works only with the Windows XP
operating system .
Download the patch here:
http://www.microsoft.com/downloads/details.
You also need to download the latest driver for your Belkin Wireless
Network Card from the Belkin support site . Other operating systems
are not supported at this time . Microsoft’s patch only supports
devices with WPA-enabled drivers such as Belkin N1 products
Download the latest driver at http://web.belkin.com/support for
the following products:
F5D8001, F5D8011, F5D8051, F5D8071
I am having difficulty setting up Wireless Protected Access (WPA)
security on my Belkin N1 Vision for a home network.
1.
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)” .
2.
For “Encryption Technique”, select “TKIP” . This setting will have
to be identical on the clients that you set up .
3.
Enter your pre-shared key . This can be from eight to 63
characters and can be letters, numbers, symbols, or spaces .
This same key must be used on all of the clients that you set up .
For example, your PSK might be something like: “Smith family
network key” .
4.
Click “Apply Changes” to finish . You must now set all clients to
match these settings .