Belkin F1DN102C, User Manual

Page: 33 / 63

Belkin® Secure DVI KVM Switch, Secure KM Switch and
Secure Windowing KVM EAL 4 augmented ALC_FLR.3 Security Target Rev. 1.01
Page | 33
T.INFECTED
TOE may be attacked by
a coupled COMPUTER
that was infected by a
malicious code inserted
by an unidentified threat
agent causes the TOE to
change its functionality
and subsequent
compromise of the data
flowing through the TOE
or the NETWORKS
connected to its coupled
COMPUTERS.
O.ROM
TOE software/firmware shall be
protected against unauthorized
modification. Embedded software
must be contained in mask ‐
programmed or one ‐ time ‐
programmable read ‐ only memory
or fuse protected flash permanently
attached (non ‐ socketed) to a circuit
assembly.
O.USBDETECT
The TOE shall detect any USB
connection that is not a pointing
device, keyboard, user
authentication device or display and
will perform no interaction with
that device after the initial
identification.
O.ROM
This Objective assures that TOE
software/firmware will be
protected against unauthorized
modification. Embedded
software must be contained in
mask ‐ programmed, fuse
protected flash or one ‐ time ‐
programmable read ‐ only
memory permanently attached
(non ‐ socketed) to a circuit
assembly.
O.USBDETECT
This objective will ensure
detection of the connection of an
unauthorized device to the TOE
Console USB port. Information
from this port would be ignored
and not be passed on to a
connected computer. This
objective also ensures that
invalid connections are
recognized on the keyboard,
pointing device, User
Authentication device and
display console ports.
T.SPOOF
Via intentional or
unintentional actions, a
USER may think the set
of SHARED PERIPHERALS
are CONNECTED to one
COMPUTER when in fact
they are connected to a
different one.
O.INDICATE
The AUTHORIZED USER shall receive
an unambiguous indication of which
SWITCHED COMPUTER has been
selected.
O.SELECT
An explicit action by the
AUTHORIZED USER shall be used to
select the COMPUTER to which the
shared set of PERIPHERAL DEVICES
is CONNECTED. Single push button,
multiple push button, or rotary
O.INDICATE :
The USER must receive positive
confirmation of SWITCHED
COMPUTER selection.
O.SELECT :
The USER must take positive
action to select the current
SWITCHED COMPUTER.