Belkin AP51300fc10-BLK, User Manual

Page: 17 / 138

B
elkin
Pur
eA
V
Hybrid
A
VU1500
UP
S
14
®
®
Features | Front Panel
21. Battery Run Time Stage – during a power outage, this unit will
shut down power to your connected home theater equipment in
stages (unless override is on). Each stage is associated with specific
rear-panel power outlets. This display indicates which stage(s)
have shut down, which stage the unit is currently in, and which
stage(s) remain.
An empty circle (e.g.,
ö
): stage already shut down
A blinking circle: current stage
A solid circle: future stage
During battery backup or normal operation, you can press the
“Stage Time” button to cycle through each stage and see how much
usable battery-backup time each stage has. Note, however, if the
override feature is on, there are no shutdown stages so only the
override battery-backup time can be viewed (i.e., estimated total
battery-backup time without any automated stage shutdown).
22. Battery-Backup Time – during normal operation or battery backup,
these numbers automatically update to show you how much
approximate battery-backup time there is for any specific stage (or
total battery-backup time if staged shutdown is overridden).
23. Battery ON – this will only display when the unit’s battery is being
used (e.g., during a power outage).
24. Battery OK – this will remain displayed so long as the unit’s battery
is in good health.
25. Overload – when the battery’s load level approaches a critical level,
the overload icon will appear (it will blink on and off).
This may happen if your connected equipment is drawing/
consuming too much power. If the battery load exceeds its
maximum safe threshold, the entire unit will automatically shut
down to prevent damage.
26. Replace Battery – this will display when the unit’s battery is in
poor health and must be replaced. If a power outage occurs when
the battery needs replacing, the AVU1500 will simply shut down
immediately. See “Battery Replacement” on page 45 for
more details.
27. Battery-load meter – this meter illustrates the size of the load (in
watts) currently placed on the AVU1500. During normal operation,
with no connected equipment, the load meter will register a
minimal load (one bar). As equipment is added, the load meter will
increase. The maximum load that the AVU1500 can safely handle is
1000 watts and all five of the meter’s bars will blink when the unit
exceeds a safe maximum capacity.
28. Battery-charge meter
– shows the battery’s charge level (i.e.,
the remaining usable battery power supply). If the battery is
fully charged, then all five bars will be displayed. If the battery is
charging, the bars will blink on and off (similar to a mobile phone).