Operating Manual WD 425E
Rev. 1.
1
, LS Page 15 of 34
78563_E rev 1.1.doc
If at all possible, wash good must be self draining. The supplementary heat energy and the prolonged drying
cycle required to dry these spots is disproportionately high and it promotes aging of equipment components.
When offloading wash goods, the trapped water is drained; metallic wash goods will dry within a few min-
utes.
When in doubt, do not hesitate and contact your Belimed medical consultant.
2. Operation, Keyboard
Pic. 73091
Legend
1- 4 Arrow keys
1. Printout
Operating Data
is like program
recipe and setup calibration.
2.
Beeper
ON / OFF, at program end and in
case of error, an acoustic signal is
sounded.
3.
Printer
ON / OFF
4.
Shift key
programs P7 - 12
Program keys
(PT) 1, 2, 3, 4, 5, 6
5.
Program keys
, selecting of programs P 1-
6, with shift P 7-12
6.
Door button
, open door
7.
Reset, i.e. ON / OFF
button (IO)
Pressing for 4 seconds, then releasing,
batch number and machine N° is dis-
played.
3. Operation Indication
3.1 Normal Operation
Close the door. Display shows the following:
Program ready
Date Time
Check if date and time are correctly indicated, required corrections can be made by a trained house techni-
cian. The data are passed on for batch documentation. The machine is operational and may be started by
means of program keys P1 to P6.