5
Charging the handset
An empty battery icon
indicates the batteries need recharging. Place the handset on the base unit
or the charger
to recharge the batteries. A handset reaching a very low battery voltage level will go into sleep mode, displaying
lOW BATT
on the screen.
Get into the habit of putting the handset on the base unit or the charger to charge when it is not in use to ensure the
handset is always fully charged.
Registering your handset
You will need to register your handset if it shows
NOT REG
in the display or if you wish to un-register from its
original base and register the handset to a different base unit. You can register up to 4 handsets to your Twist 356 base
station and up to 5 handsets to your Twist 366 base station.
To register your handset:
1. Press
the
MENU
key.
2. Select
SETTINGS
and press the
OK
key.
3. Select
REGISTER
and press the
OK
key.
4. Before you enter the PIN, press and hold the
PAGING
key on the base for 4 seconds until a
registration tone is emitted (Twist 366 only). The base is now in the registration mode. (If the base
is full and cannot take on any more handset, it will emit a reject tone instead (Twist 366 only) and
you will not be able to register any more handset. See Section 9 -
Un-registering a handset
- page 20.)
5. Enter the PIN of the base and press the
OK
key.
During the registration period, you will see
SEARCHNG
on the handset.
You will hear a confi rmation tone if the registration is successful. The handset label and the handset number will be
displayed. If the registration is not successful, the previously unregistered handset will display
NOT REG
again and the
previously registered handset will connect back to its original base again. Follow the procedure and try again.
Charging the handset
SETTING UP YOUR PHONE
