32
2255..
DDeeccllaarraattiioonn ffoorr tthhee iinnssttaallllaattiioonn ooff ppaarrttllyy ccoom
mpplleetteedd m
maacchhiinneerryy
as defined in Directive 2006/42/EC, Annex II, Part 1B
BelFox Torautomatik GmbH
Gewerbestraße 3-5
36148 Kalbach
We hereby declare that the partly completed machine
Sliding gate operator
Drive Portal and Drive Portal 800.i
As far as the scope of delivery allows, the basic requirements of the
complies with the following guidelines:
Machinery Directive 2006/42/EC
EMC - Directive (2014/30/EU
Low Voltage Directive (2014/35/EU)
Radio Equipment Directive RED (2014/53/EU)
RoHS (EU Directive 2011/65/EU)
Applied harmonised standards, the references of which have been published in the Official Journal of
the EU:
EN ISO 13849-1:2008 Cat.2 / PLc -
Force limitation and evaluation Safety contact strips
DIN EN 60335-1/2, where applicable
Safety of electrical appliances/drives for gates
DIN EN 61000-6-3
Electromagnetic compatibility - Emission
DIN EN 61000-6-2
Electromagnetic compatibility - Immunity
DIN EN 60335-2-103
Safety electrical appliances for household and similar purposes
-Part 2: Particular requirements for drives for gates, doors and windows
Furthermore, we declare that the special technical documentation for this partly completed machine
has been prepared in accordance with Annex VII Part B and undertake to forward this documentation
to the market surveillance authorities via our documentation department on request.
Commissioning of the partly completed machine is prohibited until the partly completed machine has
been incorporated into a machine which complies with the provisions of the EC Machinery Directive
and for which an EC Declaration of Conformity in accordance with Annex II A is available
D-36148 Kalbach; 01.07.2020 Unterschrift: ________________________
Name and function: Jens Broßmann, standards and documentation officer
Responsible for documents
Engineer electrical and development technology
Annex
requirements of Annex I of 2006/42/EC that have been complied with. The numbers refer to the sec-
tions of Annex I:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.6, 1.3.2, 1.3.4, 1.3.7, 1.3.9, 1.5.1, 1.5.6, 1.5.11, 1.7.1, 1.7.1.1, 1.7.2,
1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2 (partly)
33
2266..
W
Waarrrraannttyy ccoonnddiittiioonnss
Duration of warranty by the manufacturer
Our sliding gate operators are carefully controlled quality products. Should the-
re still be any complaints, we provide a one-year warranty for all parts. The
warranty period is not extended by making use of the warranty.
Terms and conditions
The goods must have been purchased through the distribution channel spe-
cified by us.
The proof of purchase shall be deemed proof of your warranty claim.
Services
This warranty covers all defects that can be proven to be due to material or
manufacturing defects. The warranty covers the elimination of such defects at
the manufacturing plant. Replaced parts become our property. Further claims
do not exist. The warranty expires in case of damage and malfunctions caused
by:
Non-observance of the assembly and operating instructions
improper installation and connection of the actuator
improper commissioning and operation
mechanical damage due to fall, impact or accident
negligent or wilful destruction
martens, rodents, insects and other wild and/or domestic animals
normal wear and tear
Lack of maintenance
Repair by non-qualified persons
Use of parts of foreign origin
external influences such as fire, water and abnormal environmental
conditions
Disguise or remove the type plate
