ENG
LI
SH
2
Attention:
The information from the type plate must be entered here or glue the second supplied
type plate here.
Name oft he drive:
Sliding gate operator / swing gate operator
UN
=
UMotor
=
=
=
V
≈
Duty cycle:
Serial – no.:
Year of
Manufacture:
Notes of the mechanic:
Please bring here the second
supplied
name plate on.
3
CCoonntteennttss
Contents ............................................................................................................... 3
1. Thank you for your trust ................................................................................... 5
2. General information about this manual ........................................................... 5
3. General warning and safety instructions .......................................................... 6
3.1. Warnings used ............................................................................................................... 6
3.2. Safety notes ................................................................................................................... 6
3.3. Intended use .................................................................................................................. 7
3.4. Non-intended use .......................................................................................................... 7
4. Technical data .................................................................................................. 9
5. Scope of delivery of the Premium Sliders 500 / 800 / 800i ............................10
5.1. Standard accessories for the Premium Slider 500 / 800 with motor control 47-21-
11AW .................................................................................................................................. 10
5.2. Standard accessories for the Premium Slider 500i / 800i with motor control 47-21-i . 10
6. Structure of the drive / system explanation ...................................................11
7. Dimensions of the drive .................................................................................13
8. Opening the drive ...........................................................................................14
9. General safety instructions for installation ....................................................14
10. Checking the gate / preparing the gate system ............................................15
11. Preparation for installation / cable plan .......................................................16
12. Requirements for the foundation ................................................................17
13. Setting up the Premium Slider 500 / 800 / 800i ...........................................19
14. Installation of the drive ................................................................................19
15. Selection of the drive system (rack) .............................................................21
16. Installation of the rack ..................................................................................21
16.1. Not pre-assembled rack on the gate: ........................................................................ 21
16.2. Pre-assembled rack on the gate: ............................................................................... 21
17. Function and adjustment of the reed limit switches / permanent magnets 22
18. Function and adjustment of the reference switch .......................................23
19. Connections (control unit 47-21-0 or optionally 47-21-i) .............................24
20. Opening direction – DIN – left – DIN - right ..................................................26
20.1. DIN left: ..................................................................................................................... 26
20.2. DIN right: ................................................................................................................... 26
21. Initial operation / adjustment of the motor control / test run ....................27
21.1. Safety instrucions for commissioning and operating the gate system ....................... 27
21.2. Setting the control unit .............................................................................................. 28
21.3. Test run with control unit 47-21-0 ............................................................................. 28
21.4. Test run with control unit 47-21-i .............................................................................. 28
22. Notes on emergency unlocking ....................................................................29
23. Inspection and maintenance ........................................................................30
23.1. Safety instrucions for repair ...................................................................................... 30
24. Disassembly (for powder coating) and disposal ...........................................31
