8
The product may
only be used for the purpose intended by the manufacturer.
Any other use is to be considered improper and therefore dangerous. We can-
not give any guarantee or warranty for damage caused by other uses or by faul-
ty installation and are not liable for this either.
Improper modifications, additions and/or conversions to the drive or the con-
trol unit can lead to unforeseeable dangers.
3.5 Safety instructions for competent / knowledgeable persons who
may carry out assembly, operation, maintenance, repair and disas-
sembly.
Assembly, maintenance, repair and disassembly of the actuator must be carried
out by a competent person.
In case of failure or malfunction of the actuator, a competent person must be
immediately assigned to the inspection / repair.
According to EN 12635, a skilled / competent person is a person who has sui-
table training, qualified knowledge and practical experience to install, check,
maintain and repair a door system correctly and safely. This person must also
ensure that the applicable national regulations on occupational safety as well
as regulations for the operation of electrical equipment are followed.
Packaging material should be stored out of the reach of children and disposed
of in accordance with applicable national regulations.
You will find the relevant safety notes and instructions in the respective chap-
ters of this manual. Please observe and follow these instructions to avoid any
residual risks.
ATTENTION!
Inform yourself on the basis of the EU - guidelines
on the safety in use of power-operated doors
about prescribed safety devices.
9
44..
TTeecchhnniiccaall ddaattaa
Type:
Premium Slider 500 /
Premium Slider 500i
Premium Slider 800 /
Premium Slider 800i
Engine power
:
480 W
500 W
Mains supply:
230V / 50 Hz
230 V / 50 Hz
Opening and Closing
speed
18
cm
/
sec.
(500)
20
cm
/
sec
(500-i)
20
cm
/
sec
(800)
25
cm
/
sec.
(800-i)
Push and pull force
(nominal/max.)
:
800 N
1100 N
Max. door width / gate
weight:
8 m / 500 kg
14 m / 800 kg
Motor voltage:
24 V DC
24 V DC
Drive system:
Zahnstange Modul 4
Zahnstange Modul 4
Profile dimensions:
350 mm x 200 mm
350 mm x 200 mm
Standard height:
445 mm
445 mm
Base plate dimensions:
465 mm x 210 mm x 10
mm (l / b / h)
465 mm x 210 mm x 10
mm (l / b / h)
Wall thickness (post):
4 mm
4 mm
