Firmware update
54
9.1 Firmware update with EoE
Technical manual LioN-P EtherCAT® Digital-I/O
Release 1.0 11/2016
9
Firmware update
A firmware update of the module can be done with the modules' integrated
web server over the EoE (Ethernet over EtherCAT) protocol, or over the FoE
protocol (File over EtherCAT).
9.1
Firmware update with EoE
The EoE service must be supported by the master and the device. For
configuring the EoE service on a device see chapter
.
If the EoE service is configured and the device is at least in the Pre-Op state,
enter the IP address of the device into your browser and navigate to the
“Config” page.
Click the button “Firmware Update” and select the update file provided by
Belden.
WARNING
Don’t disconnect the power supply of the device during the update!
