Firmware update
Technical manual LioN-P EtherCAT® Digital-I/O
Release 1.0 11/2016
9.2 Firmware update with FoE
57
After the file is transferred, a reset command or power cycle is needed. With
the restart of the device the update package will be extracted and the old
firmware files will be replaced by the new files included within the update
package.
The LED left of the U
S
LED (U
L
LED for devices with outputs) is flickering and
blinking red during the update.
After all files have been extracted, the U
L
and U
S
LED are blinking green two
times. Afterwards the device does a restart and the firmware update is
finished.