38
Installation OCTOPUS OS3
Release 03 08/2020
2.4
Connecting the supply voltage
Mount the power supply cable to the power supply connector of the
device.
You find the prescribed tightening torque in chapter:
Enable the supply voltage.
Note:
Applies to device variants featuring supply voltage with characteristic
value PP:
Exclusively use a PoE power supply unit with galvanic isolation.
Hirschmann has tested the power supply unit PC150/110V/54V and
recommends its use. You find the order number for the power supply unit,
which is available as accessory, under:
Note:
For use cases according to EN 50155, exclusively use external front
end power supply units of type PC150/110V/54V, or else the suitability of the
device for this use case is void.
WARNING
ELECTRIC SHOCK
Connect only a supply voltage that corresponds to the type plate of your
device.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
Summary of Contents for HIRSCHMANN OCTOPUS OS3
Page 60: ......
