Belden HIRSCHMANN OCTOPUS OS3, User Manual

Page: 34 / 60

34
Installation OCTOPUS OS3
Release 03 08/2020
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
Hirschmann supplies the device ready for operation.
Perform the following steps to install and configure the device:

Checking the package contents
 Installing and grounding the device
 Connecting the supply voltage
 Connecting data cables
2.1 Checking the package contents

Check whether the package includes all items named in the section
“Scope of delivery” on page 56 .

Check the individual parts for transport damage.
2.2 Installing and grounding the device

When you are selecting the installation location, make sure you observe
the climatic threshold values specified in the technical data.
Prevent heat from the surroundings from affecting the device.

Verify that there is at least 4 in (10 cm) of space around the device.

Remove the provided transport protection caps and the transport
protection screws from the device.
CAUTION
BURNING HAZARD
The surfaces of the device casing may become hot. Avoid touching the
device while it is operating.
If ambient temperatures are
≥ 113 °F ( ≥ 45 °C), exclusively install the device
in “restricted access locations” according to EN 62368.
Failure to follow these instructions can result in injury or equipment
damage.