manualshive.com logo in svg

Belden Hirschmann MACH104-16TX-PoEP Series, User Manual

Share
Download
Belden Hirschmann MACH104-16TX-PoEP Series User Manual Download Page 24

24

Installation MACH104-PoEP

Release 06 11/2013

2.2

Installing SFP/XFP transceivers (optional)

Note: 

You will find further information under 

“SFP/XFP transceiver” on 

page 18

.

Note: 

Only use Hirschmann SFP/XFP transceivers.

Before attaching an SFP or XFP transceiver, first remove the protective 
cap of the SFP/XFP transceiver.

Push the SFP/XFP transceiver with the lock closed into the socket until it 
latches audibly in place.

Figure 3: F/O SFP transceiver

2.3

MACH104-16TX-PoEP-E...,

MACH104-16TX-PoEP+2X-E...:

Wiring and assembling the operating 

voltage

 WARNING

ELECTRIC SHOCK

Never insert sharp objects (small screwdrivers, wires, etc.) into the 
connection terminals for the power lines, and do not touch the terminals!

Non-adherence  to  these  instructions  can  lead  to  death,  serious  
physical  injury  or  material  damage.

Summary of Contents for Hirschmann MACH104-16TX-PoEP Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands