Installation MACH104-PoEP
Release 06 11/2013
17
1000 Mbit/s F/O ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 1000BASE-
SX/1000BASE-LX standard.
These ports support:
Autonegotiation
Full duplex mode
Delivery state: autonegotiation activated
1.6.4
10-Gbit/s F/O port
This port is an XFP slot.
The 10 Gbit/s F/O port allows you to connect network components according
to the IEEE 802.3ae 10GBASE-SR/LR standard.
Full duplex mode
Default setting: Full duplex
1.6.5
PoE ports
Note:
Only connect the PoE connections to PoE-supplier devices whose
data connections are located in the interior of the building and are specified
as SELV circuits.
Note:
You will find further information under
“10/100/1000 Mbit/s twisted pair
Some twisted-pair ports support Power over Ethernet (PoE):
The PoE ports allow the connection and remote supply of, for example, IP
telephones (Voice over IP), webcams, sensors, printer servers and WLAN
access points. With PoE, power is supplied to these terminal devices via the
twisted-pair cable.
The PoE support complies with the following standards:
Ports
PoE support
1 to 4
No
5 to 20
Yes
Table 8:
Twisted-pair ports and PoE support
Standard
Description
IEEE 802.3af
Brief description
PoE
Classes
Max. Powered Device (PD) class 0 (15.4 W)
IEEE 802.3at
Brief description
PoE Plus
Classes
Max. Powered Device (PD) class 4 (30 W)
Table 9:
PoE support: Standards
