manualshive.com logo in svg

Belden Hirschmann MACH104-16TX-PoEP Series, User Manual

Share
Download
Belden Hirschmann MACH104-16TX-PoEP Series User Manual Download Page 15

Installation MACH104-PoEP

Release 06 11/2013

15

1.5.1

MACH104-16TX-PoEP...

MACH104-16TX-PoEP+2X...

For the supply voltage, the following applies:

A power module providing the PoE voltage and the internal supply voltage 
is integrated in the device.

Supply voltage is connected via a non-heating appliance socket.

The input voltage is electrically isolated from the housing.

1.5.2

MACH104-16TX-PoEP-R...

MACH104-16TX-PoEP+2X-R...

For the supply voltage, the following applies:

The supply voltage can be connected redundantly.

Two power modules providing the PoE voltage and the internal supply 
voltage are integrated in the device. The power modules operate in load-
sharing mode.

Supply voltage is connected via non-heating appliance sockets.

The input voltage is electrically isolated from the housing.

Both inputs are separate from one another.

Note: 

With non-redundant supply of the mains voltage, the device reports a 

power failure. You can prevent this message by applying the supply voltage 
via both inputs, or by changing the configuration in the Management.

1.5.3

MACH104-16TX-PoEP-E...

MACH104-16TX-PoEP+2X-E...

For the supply voltage, the following applies:

PoE voltage and internal supply voltage are provided by an external 
power module.

The voltage supply is connected via a 3-pin terminal block with snap 
locks.

You will find further information under 

“MACH104-16TX-PoEP-E..., 

MACH104-16TX-PoEP+2X-E...: Wiring and assembling the operating 
voltage” on page 24

.

1.6

Ethernet ports

You can connect terminal devices and other segments on the ports of the 
device via twisted pair cables or F/O cables. 

1.6.1

10/100/1000 Mbit/s twisted pair port

This port is an RJ45 socket.

Summary of Contents for Hirschmann MACH104-16TX-PoEP Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands