Installation MACH104-PoEP
Release 06 11/2013
19
SFP is the acronym for Small Form-factor Pluggable which is also commonly
known as mini-GBIC (GigaBit Interface Converter).
Both Fast Ethernet SFP transceivers and Gigabit Ethernet SFP transceivers
are available for your device.
XFP transceivers are slightly larger than SFP transceivers. They support 10-
Gigabit Ethernet only.
Note:
Only use Hirschmann SFP/XFP transceivers.
1.7
Display elements
After the operating voltage is set up, the software starts and initializes itself.
Afterwards, the device performs a self-test. During this process, various
LEDs light up.
The process takes around 15 seconds.
1.7.1
Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
The following table applies to the stated device variants only:
MACH104-16TX-PoEP-R...
MACH104-16TX-PoEP+2X-R...
The following table applies to the stated device variants only:
MACH104-16TX-PoEP...
MACH104-16TX-PoEP-E...
MACH104-16TX-PoEP+2X...
MACH104-16TX-PoEP+2X-E...
LED
Display
Color
Activity
Meaning
P
Power
supply
Green
Lights up
The supply voltages 1
and
2 are on.
Yellow
Lights up
The supply voltages 1
or
2 are on.
None
The supply voltages 1
and
2 are too low.
LED
Display
Color
Activity
Meaning
P
Power
supply
Green
Lights up
The supply voltage is on.
None
The supply voltage is too low.
FAULT
RM
Sb
P
