10
MACH 1040
Release 02 03/2013
National and international safety regulations
Make sure that the electrical installation meets local or nationally
applicable safety regulations.
CE marking
The devices comply with the regulations contained in the following
European directive(s):
2004/108/EC
Directive of the European Parliament and the council for standardizing
the regulations of member states with regard to electromagnetic
compatibility.
2006/95/EC
Directive of the European Parliament and the council for standardizing the
regulations of member states with regard to electrical equipment to be
used within specific voltage ranges.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Tel.: +49 1805 141538
The product can be used in the industrial sector.
Interference immunity: EN 61000-6-2:2005
Emitted interference: EN 55022:2010
Safety: EN 60950-1:2006 + A11:2009 + A1:2010
Warning!
This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
Note:
The assembly guidelines provided in these instructions must be
strictly adhered to in order to observe the EMC threshold values.
Summary of Contents for HIRSCHMANN MACH 1040 Series
Page 51: ...MACH 1040 Release 02 03 2013 51...
Page 52: ......
