10
Overview of the Vertigo XG
Rear Panel Components
Discrete Audio
connectors
Vertigo XG hardware option: Vx-Audio-e
A breakout cable is used to connect the optional discrete audio card
I/O connectors to the BNC audio input/output cables. See
, on page 13 for more information about the
Vertigo XG’s discrete audio input/output channel connections.
GPI Card Connector
Vertigo XG hardware option: Vx-GPI-8-e
The GPI card allows for control of the Vertigo XG via GPI triggers. The
card provides for up to 8 optically isolated GPI inputs and 8 reed
relay GPI outputs.
Port A is an 8 bit input port connected to optically isolated inputs
sensors. Each sensor can be used to interface a voltage and then
sense whether the voltage is on or off.
The reed relays are well suited for low current applications. The
relays are normally open, and will close when energized.
The following tables identify the pinout assignment for the GPI card’s
input and output ports:
Input Ports Pin Assignment
Output Ports Pin Assignment
Power and Ground Pin Assignments
Summary of Contents for grass valley VERTIGO XG
Page 12: ...xii Table of Contents...
Page 14: ...2 Introduction...
