Belden Grass Valley NV9000, User Manual

Page: 24 / 87

14
Configuration
Adding a Panel to an NV9000 Configuration
After launching NV9000-SE Utilities, choose ‘Control Panels’ from the Configuration pane in
the navigation area. The ‘Control Panels’ configuration page appears:
Click ‘Add Control Panel’ at the bottom of the configuration page. The ‘Add Control Panel’
page appears:
Choose “NV9601” from the ‘Type’ field. In the ID field, enter the panel ID you assigned to the
panel while it was in setup mode. Give a name to the panel in the name field and select a
user.
When you are creating a panel configuration you have 3 options. These options are
presented in the ‘Configuration Options’ area:
1 Make a copy of an existing configuration file, giving it a new file name.
2 Use an existing configuration file. (This allows several panels to share a single
configuration.)
3 Create an entirely new configuration file.