KAYENNE/KARRERA — Release Notes
39
Calibrate the Karrera Lever Arm and Joystick
Calibrate the Karrera Lever Arm and Joystick
It is recommended that the Karrera Control Panel Lever Arm (for each
Transition area) and Joystick be calibrated after a software update.
1.
On any Karrera panel EMEM area, press
Menu
,
Page
.
2.
Select
Calib
, choose the ME Lever Arm or Joystick to calibrate, and
follow the instructions displayed.
Lever 1 is the topmost Lever Arm on the panel.
K-Frame System Default IP Addresses
K-Frame systems are shipped with default IP addresses. These default
addresses can be used if the K-Frame system is operating on a dedicated
network with no other devices present. Note that these addresses can be
changed during installation, and so your system may not be using these
defaults.
Table 1. Kayenne/Karrera K-Frame System Default IP Addresses
Device
IP Address
Video Processor Frame CPU
192.168.0.170
Image Store CPU
192.168.0.171
Control Panel Surface 1A
192.168.0.173
Touch Screen Menu Panel 1
192.168.0.175
Touch Screen Menu Panel 2
192.168.0.176
Control Panel Surface 1B
192.168.0.177
Control Panel Surface 2A
192.168.0.178
Control Panel Surface 2B
192.168.0.179
ClipStore Server
192.168.0.180
32-Crosspoint Remote Aux Panels
V1.6.5 and higher software:
(hard reset with the front panel buttons)
IP Address: 192.168.1.2
Frame IP: 192.168.1.1
Gateway IP: 192.168.1.1
Subnet Mask 255.255.255.0
Note
32-Crosspoint Remote Aux Panel default settings must
be changed to operate with a Karrera system whose
other components are configured with their default IP
addresses.
All Subnet Masks)
255.255.255.0
All Gateways
(except V1.6.5 software Remote Aux panel)
192.168.0.1
Reserved For Future Use
CAUTION
Do not connect any devices configured with the fol-
lowing IP addresses to a Karrera network.
Video Processor Frame Gigabit Ethernet
192.168.0.172
PCU Panel Reserved LAN Port
192.168.0.174
