16
KAYENNE/KARRERA — Release Notes
Version 8.0
Enabling E-MEM Levels from the E-MEM Enables Tab
ME levels for an E-MEM can be enabled/disabled from the E-MEM &
Timeline, Timeline Edit, E-MEM Enables menu tab. Proxy eDPM control is
also provided, however eDPM sub-levels are in the eDPM menus. Levels
updated in either the Master E-MEM or E-MEM Enables tab are reflected in
both.
Prerequisite: Read the Define E-MEM section in the User Manual for your
switcher model.
1.
Select an E-MEM register.
2.
Select
E-MEM & Timeline
,
Timeline Edit
,
E-MEM Enables
in the menu.
3.
Enable or disable E-MEM levels and sub-levels for the selected register.
4.
Select
Update Levels
(top right of menu) to save the effect to the register;
the effect can be run without updating the levels. However, when
recalled, the effect will return to the saved state.
Router Source Name Changes are Now Updated in the GV
Switcher
When an NV9000, Encore, or other supported router is connected to a GV
Switcher system using Grass Valley’s Native Protocol (SMS 7000), and
router source names are changed, the system and menu will now be
updated automatically, with a few limitations.
The following areas of the GV Switcher system will continue to require a
manual update for a router source name change:
•
R-MEMs—Learn a new R-MEM in the Router, R-MEM menu,
•
Macros—Learn a new Macro in the Macro menu,
•
Device Control configuration for router sources—Update the router
source name in the Eng Setup, Router menu, and
•
Switcher sources configured for router destinations—Update the
Router Destination source name in the Eng Setup, Source Definition
menu.
CAUTION
If these areas of the system are not manually updated, the router source may
behave unexpectedly or no longer work.
