34
KAYENNE/KARRERA — Release Notes
Version 8.0
Note
A new Menu Panel or PC that has not been used with the switcher system will
need to be configured as a Control Surface Node before it can operate with a
switcher system. See the
Karrera
or
Kayenne
Installation and Service
Manual
for specific instructions.
From the K-Frame Installer menu, touch the
System
button and touch the
device to be cleared. Touch the
Clear NV
button. Repeat for Control Panel
and Frame.
Figure 33. K-Frame Installer Program Clear NV
Install .NET for First Time Menu on PC Installation
The Windows .NET Framework software is required for Menu on PC appli-
cation operation, you can go to the PC’s Add or Remove Programs to see
what, if any .NET versions have already been installed. The Menu applica-
tion requires at least .NET version 4.0 for XP or 4.5 for Windows 7 to
operate and other third party software listed in the Third-party updates
folder on the download site.
The .NET framework software is included on the K-Frame Software USB
stick, and is also available on the Grass Valley website.
1.
Insert the K-Frame Software USB stick into the PC’s USB port.
2.
Open the Third-party Updates folder, and in the
DotNet
folder run:
•
For Windows XP: dotNetFx40_Full_x86_x64.exe, or
•
For Windows 7: dotNetFx45_Full_x86_x64.exe file.
Files will be extracted to your PC and then the .NET Framework Setup
application will run. Accept the license agreement and click
Install
.
