20
KAYENNE/KARRERA — Release Notes
Version 8.0
Figure 10. Debug Menu
6.
Enter the number fifteen [15] for the Flash HADs menu, at the prompt:
->15
Result:
Figure 11. Flash HADs Menu
7.
Enter the letter m [M] for the Multi Boot Configuration menu, at the
prompt:
->M
Result:
Figure 12. Multi Boot Configuration Menu
8.
Enter the letter Y to begin the reprogramming of the HADs, at the
prompt:
->Y
Result: HADs are being erased and programmed which can be seen on
the serial console monitor. If successful, a confirmation similar to the
following will be displayed on the serial console monitor.
Figure 13. Successfully Installed HAD Example
