KAYENNE/KARRERA — Release Notes
25
Update the Kayenne/Karrera K-Frame Software
visit www.grassvalley.com. The installer places the K-Frame samples in the
C:\K_Frame\user\Samples directory on the GV Switcher system. New
K-Frame systems are shipped with the sample directory installed.
Note
For Compact S-series Frames, samples that are built using more than four
keyers will need some customization before incorporating those elements
into a production.
Materials Required
You will need the following materials for this update:
•
Version 8.0 Software;
K-FrameSetup.exe
, which can be downloaded from
the Grass Valley Customer Support website along with the latest Clip-
Store/Summit software, Release Notes, and Release Notes Addendum,
and copied to a USB stick,
•
Backup media for configuration and effects files,
•
USB mouse and keyboard, and
•
a Menu Panel, or user PC, properly configured on the switcher system
network.
Update the Kayenne/Karrera K-Frame Software
Backup Current Configuration and Effects Files
This software update procedure assumes your Grass Valley switcher
system is fully operational with all network communications properly con-
figured. Refer to the
Karrera K-Frame
or
Kayenne K-Frame Installation and
Service Manual
for configuration instructions.
1.
Save your system configuration files (Eng Setup, User Setups), and
your operational registers (EMEM, Macros, etc.) and other settings. You
can create a Show file that contains all this information. See the
Karrera
or
Kayenne
K-Frame User Manual
for file operations instructions.
Note
A convenient location to save these backup files is on the USB stick of the
software version that created the files (the older software being updated).
Create a new folder on that older software USB stick for the file and name the
Show file with the current date.
2.
Store the backup media in a safe place. You may want to use these files
if you decide to back down to that earlier software version.
