58
Configuring Your GV Node
Output Timing
2 Click on the
Output on Error Mode
pulldown.
3 Click to select the desired SDI output from the XIO-4901 when the input from the the
IFM-2T is in error.
Output
Details
Blank
Use the selections made in the 9 individual channel tabs.
Color bar
Feed a standard color bar to the SDI output.
RGB value
Feed a full-frame color patch to the SDI output.
4 You must select the color patch individually for each of the nine outputs, as per
choose the color for the RGB value
, on page 54. You can use the color patches here
instead of returning to the individual tabs - they are interconnected.
Output Timing
Output Timing to Reference
To see the timing relationship between an SDI output and the GV Node’s URS signal
1 Click
Output Config
and select the
SDI OUT
tab for that output.
2 Select the
Video
tab and view the
Timing to Reference
data window.
Timing Configuration
1 Click
Output Config
and select the
SDI OUT
tab for that output.
2 Select the
Video
tab and view the
Timing Configuration
section.
