52
Configuring Your GV Node
Input Configuration - SDI
1 2
3
4
5
6
7
Icon #
Significance
1
Card control status for this XIO-4901:
• Green (REM): Remote control via this iControl service panel.
• Yellow (LOC):
Local control of this card from the GV Node’s local control panel.
2
Status of the SDI Inputs:
• Green: Inputs
OK.
• Red:
At least one input is in error.
3
Status of the SDI Outputs:
• Green: Outputs
OK.
• Red:
At least one output is in error.
4
Status of the GV Node’s frame URS arriving at the XIO-4901:
• Green: URS
OK.
• Red: URS
fault.
5
Status of the Ethernet connection (via the controller rear panel)
Green:
Ehernet OK
Red:
Ethernet fault.
6
Card health:
• Green: Card OK.
• Red:
Card failure.
7
Processing Mode:
• Green:
Normal operation.
• Yellow: Test signal activated on at least one input or output.
When an error is flagged, an error status message will be shown beneath the dashboard
icons. Multiple error messages will cycle in the display.
• You can always check the current status of an icon by mousing over; the status will be
shown in the message area.
Input Configuration - SDI
The
Input Config
panel provides resources to configure the processing of the nine rear-
panel SDI inputs before they are sent to the IFM-2T fabric module.
To assign a name to an input
1 Click
Input Config
and select one of the nine
SDI IN
tabs.
