GUIDE TO INSTALLATION AND OPERATION
6
| FIO-1901-R
The FIO-1901-R-SRP single-slot rear panel, mounted in a Densité 2 or Densité 3 frame, incorporates these
connectors:
•
One socket for inserting a fiber treceiver SFP module – see the list of supported modules below.
•
One BNC connector for the 3G/HD/SD SDI input
•
One BNC connector for the 3G/HD/SD SDI output
2.3 SFP Modules
The FIO-1901-R supports the following SFP optical interface module:
FIO-1901-RT Model #
Description of associated SFP module
FIO-1901-R-LC
Single fiber 3G/HD/SD Rx cartridge – LC/PC connectors
See
ANNEX 2 – Installing the Optical Interface
, beginning on page 20, for instructions on installing and removing SFP
modules.
Figure 2.1 FIO-1901-R-SRP Rear Panell
