FX FUSION SC CONNECTOR
PX106500-EN REV E
Page 5 of 8
900µm TIGHT BUFFER/250µm - INSTALLATION GUIDE
9.
Strip the cable from that mark.
To avoid breaking the fiber,
the buffer should be stripped
about 5mm at a time.
IMPORTANT:
When stripping, the
buffer and the 250µm coating
must be completely removed to
allow to cleave the fiber.
10.
Clean the fiber.
11.
Cleave the fiber at
10mm
.
For both Belden cleavers, the
10mm
mark is where the fiber
holder ends as shown on red
arrows.
DON’T TOUCH
OR
attempt to
CLEAN
the cleaved fiber.
Groove for
250µm
Groove for
900µm
