9
Operational problems
The electrical outputs of the interface conver-
ters will be switched to “high” if one of the
following faults occurs:
– The second interface converter isn’t plugged
into a terminal device,
– The second terminal device is switched off.
If the optical plug connectors of the OZDV 2471
P/G … interface converter are not attached it
is possible that random signals will appear at
the electrical outputs, especially when the
ambient light level is very high.
Combination possibility
ilities, contact the Customer Innovation
Center
For combination possib
https://www.belden.com/solutions/customer-innovation-center
