TopWinder
®
1MANUL755
Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
35
Installation
Connecting the Motor and Slip Ring to the Drive Shaft
1) Locate the Motor/Gearbox Cover with Mount Plate and the Motor/Gearbox. Secure the Motor
Cover to the Torque Plate on the Motor/Gearbox as shown below.
2) Retrieve the Drive Key, Flat Washers and Cotter Pins from the Accessory Box.
3) Apply Anti-Seize
™ to the Shaft, Key and Key Slot. Insert the Key into the slot in the Drive Shaft.
4) Slide the Motor/Gearbox and Cover Assembly over the Drive Shaft and Torque Studs, shown
below.
5) Secure the Motor Assembly to the Torque Studs using the Flat Washers and Cotter Pins, as shown
above.
DRIVE KEY
FLAT WASHER (2)
COTTER PIN (2)
See Flat Washers
and Cotter Pins
Installed on Right
Apply Anti-Sei
ze™ to the
Key and the Key Slot then
insert the Key into the
Drive Shaft Slot.
Step 3:
Drive Shaft
Slide the Motor and
Cover Asy over the
Drive Shaft & Torque
Studs. Secure with
Flat Washers and
Cotter Pins.
Step 4 & 5:
Mount Plate
Torque
Plate
Motor/Gearbox
Motor/Gearbox
Cover