TopWinder
®
28
Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL755
Installation
Installing the Drive Shaft and Hub Assembly
4) On the passenger side Arm Assembly remove the End Cap, Outside Mount and Inside Mount
/Bearing Assembly, refer to the exploded image below.
5) On the driver side Arm Assembly remove the Shaft Bearing from the Outside Mount to gain access
to the mounting bolts. Then remove the Outside Mount, Inside Mount/Bearing Assembly and the
End Cap. Refer to the image below.
6) Loosen the set screws slightly on all the Shaft Bearings on both Arm Assemblies.
Passenger Side Arm Assembly
Driver Side Arm Assembly
Inside Mount /
Bearing Assembly
End Cap
Outside Mount
Inside Mount /
Bearing
Assembly
End Cap
Outside Mount
Shaft Bearing
Shaft Bearing
Slightly loosen the set screws
on all Shaft Bearings.
Step 6:
Remove Mounts and End Cap
on Passenger Side Arm Asy.
Step 4:
Remove Outside Bearing then
remove Mounts and End Cap
on Driver Side Arm Asy.
Step 5:
